Tank Cleaner Information

DIRECTIONS FOR USE

Drain all spray equipment and wash the outside of the spray equipment
Use Label rate of TANK CLEANER

Rinse or pressure clean inside of all equipment
Use water equal to 1/10 of tank volume

Half fill spray tank with clean water and add the total tank label rate of TANK CLEANER
Agitate and flush all equipment for a few seconds. Close boom valves and replace bungs. Stop flow and completely fill tank with water. See label for detailed directions for use
Allow to stand 15mins to 24 hours depending on previous spray content

Clean all other components such as nozzles, non-drip diaphragms, screens and filters
Clean separately with a fresh solution of TANK CLEANER and water at the rate of 25mL in 10L

Do a final clean water rinse
Rinse everything with water
After completing the rest of the clean

USAGE RATE

Spraytank size	Product
500L	1.25L
1000L	2.5L
2000L	5L
3000L	7.5L
4000L	10L
Cleaning and Decontaminatin of Spray equipment	250mL/100L
Nozzles, non-drip diaphragms, screens and filters	25mL/10L

NOTE: For extra ‘sticky’ combinations (e.g. carfentrazoneethyl/glyphosate, Valor®/glyphosate etc) the cleaning solution should remain in contact with all internal surfaces of the spray equipment for at least 24 hours to increase product residue removal.